Vintage Minor Register

A club badge design already exists and can be seen on the VMR sweatshirt and on the front of our VMR Magazine.See Below:



I know this is not the first time the subject of car badges for our club has been raised, but it occurred to me that the 'wearing' of such badges on our cars would certainly aid recruitment of new members, as the badges will constantly 'advertise' the clubs existence wherever the car goes. Currently many of our cars wear the Morris Register badge and a host of other badges with no mention of the VMR. Clive Hamilton Gould can be seen in many photos wearing his VMR sweatshirts, not just in the VMR mag but in the VSCC Bulletin and if memory serves, also in 'Light Car Journey', the new Tim Cork book (page 118). Our cars could replicate many times over this type of impact and exposure.
Whilst I know the number of members who view the forum is a small percentage of the total membership, could those interested (subject to cost etc) register their interest here in order to help guage potential numbers and if I can find (or if someone knows of) a badge manufacturer, I will follow up and try and get a batch manufactured.
I want two, to kick things off.
Chris
Edited to add: Maybe Ian could put a small piece in the next VMR Magazine to guage response from the wider membership.

Count me in - Alister (Highlander.

Good morning Chris

If everything goes according to plan I'll need 1.
Just don't expect to see it on the car this summer
I'll phone you friday

Halbe

Chris, this is an excellent idea and one I have tried to work out before. I got a couple of quotes from the traditional manufacturers, but they were prohibitively expensive for a small run. Most of the cost is in the die. We would need to sell a significant number to bring the cost to something reasonable, and we would end up with the same problem we had with kingpins and other batched parts. But don't let me put anyone off trying again if they know of a suitable supplier. Let's collectively see what we can come up with. I will put something in M 130 - just to gauge possible demand.

I have spoken to Pamela Davids Enamels and sent them the badge design. They will email me badge prices tomorrow. I have also emailed Roberts Enamels both firms being recommended by Tony Gamble elsewhere on this forum.
Chris

Thanks Chris.

I have a Bean Car Club badge in front of me and this is just a cast Brass, Bronze, casting - no enamel at all. Wouldn something like nthbis be cheaper? Also what is cheap? What do you think? Alister.

Alister,
Apparently there are a number of different manufacturing options available to us. A simple cast badge may well be the way to go, particularly as we have had items cast in the past, namely the calormeter wings. Perhaps a simpler club badge design, suitable for casting, is a real viable option and perhaps the least expensive. Certainly the wings we had cast last year were very reasonable. Ian arranged this via Bev Hicks if I remember correctly?
Chris

Yes, that's right - Bev's man did a great job on the calormeter wings. We'd need someone clever to make a pattern if we went this route.

I love the idea of an enamel badge, especially as the deep blue is so pleasing! Count me in for 2 car badges. Would be good stock for selling at Beaulieu on the club stand!!!

I have just had the costs back from Pamela Davids Enamels. A 2.5 inch diameter (approx) badge bar bar metal and enamel club badge will cost £65 each + £5 postage and packing. We will be able to order these on an individual basis through the above company. Contact is Derren Taylor Tel. No. 01769 520536. However we cannot order immediatley as there are some set up processes and costs, which Ian has indicated the Register will stand. Delivery is 4-5 months, so not exactly fast, but the end result will be a quality product - not a plastic or resin affair. I am sure Ian will make a more general announcement on the web site home page and in the VMR Magazine.
Chris

BLIMEY Sounds like it will be a damn fine badge though. Does it get cheaper the more there are? May have to reconsider buying 2 immediately and make it one a year or maybe biannual as a gift!

Sorry, much too much for me. Alister.

The issue with the cast badge Alister is getting someone to make the die and mould for the casting. If anyone knows of a company or individual that could do this for us at a reasonable cost, please let me know and I will follow it up.
Chris

I agree that Pamela David badges would probably be very high quality, but the price tag is going to be too high for most, I fear.

I might be able to get a far better deal in the US. Everything is much cheaper here. A couple of years ago friend of mine had a US company cast up a batch of University Motors multi-coloured delivery plates for early MG's from an original. The castings were double-sided, to include the original UK manufacturer's details on the reverse. They were superb and totally indistinguishable from the original. They cost less than $30 each. I'll make contact with him and see if I can get a quote for some car badges.

Edited to add pic of the University Motors replica delivery plate: