Vintage Minor Register

Have a look at E-Bay item no 292462955015 - looks as if it may fit

Sports & Vintage old catalogue lists M Type tanks & hinged caps.

Ian,

There is an 1.25" downdraft SU on ebay from Fairorgan.

Do you still need the triangular camshaft cover ?

It went for £ 29.15 + about £ 7.00 for delivery

The pump I was referring to was sold last night by a chap in Sandhurst village.

I
If you bid and win SU. If you have it sent to me at Flat 2, Old Museum Court. Museum Hill. Haslemere. GU272JR. I can check it over,
report back and refurbish if you would like.

S

SU pump. Check out ebay No 142926003929. MG moved the pump from under the bonnet [LP pump] to down by the tank [HP pump]during production of the TF to get over the problem of fuel vaporisation. Should you consider doing that with rear tank [SV] models. I am seriously considering doing that with the ...

6V SU pump. Not now going to Beaulieu. May I humbly suggest that you buy a new pump from Burlen with alloy base [ £100 + VAT] or brass base [£200 +VAT] as any s/hand 6V pump, not particularly common, would need to be refurbished with at least a new diaphragm to cope with modern fuel [refurb kit £30 ...

ASJ 580 - 1930 Saloon - Released from incarceration in Pembrokeshire Museum - Chassis No 23107 - Laid down 9th April 1930 - First registered 8th July1930 - Currently fitted with SV engine.

Tyres.

Longstone tyres have a special offer on 5 off 400x18 3 block tyres + tubes + rim tapes £400.00 + VAT

Tyres are 682mm OD Width 97mm !

ERROR - should have said apron does NOT fit.......

Coil open circuit secondary - so will open unless you want it to look pretty !!!!

Interesting. I will do some research. My Jensen has 33 type but it is made of aluminium and does seem to fit very well over the rivets holding the front dumb irons to the chassis side rails. I have found a coil that would have been fitted to the steering column - the primary is OK, still have to tes...

Almost certainly going to Beaulieu next week end, do you want me to hunt for anything. What? and price limit.

Ian,

The cleaner should have been Fernox DS3.

Ronald Hogg is having a clean out and may have the floor brackets , according to Harry Edwards manual are the same for SV & OHC.

Simon

Ian, Misunderstood Roger Birds email about cylinder head thickness - his is 41 mm thick so similar to Ian Harris's. Was your head/ combustion chambers copper plated ? The previous reference to cylinders 2 & 3 referred to the block as the exhaust valves are adjacent and need the heat to be transf...