32 saloon

[g4pyd]

Hi all, has anyone a photo of the firewall and position of things theron,
I have just had a new firewall made minus the holes,
mine had that many unused holes and I would like to do away with,
like for the coil ect ,

any help would be welcome if you can not post on this site "LIKE ME" you could send to my email as fol.,

colinjohnson@ntlworld.com

many thanks
Colin
Grimsby

[Ian Grace]

Hi Colin,

I'll see what I have. For reference, here are your Minor's details:

Saloon KF 9596, chassis SV18507, first registered 18/6/32 (so it is a 1932 season car), has 1933 season radiator shell and 1934 season front wings.



You should have holes for:

Scuttle shroud
Scuttle side supports
Pair of radiator tie rod supports
Pair of floor board supports
Throttle cross-shaft
Steering column bracket
Chassis plate
Cut-out
Hole for fuel pipe
Holes and slot for slow running control
Holes for SU fuel pump (originally a Petrolift, you probably have the later SU)
Hole for wiring
Junction box
Oil can clip

Have i forgotten anything?

Here's a couple of images which might help:

First is from my McEvoy (1933 season):



And this is from a slightly earlier Hundred Pound Minor - with scuttle tank:



If you can e-mail me a pic of your scuttle, I'll be able to provide more specific advice and post it here.

[g4pyd]

Thanks Ian it now has 32 radiator shell and 32 wings almost ready to fit when I sort the firewall out.

cheers Colin@ grimsby