Page 1 of 1

Front springs for Mike Summers

Posted: Wed Dec 16, 2009 12:40 am
by Ian Grace
Mike Summers reports:

"Big day today following a few months off the road ‘resting’ - UR 9708 got its MOT after a failure because of fractured front spring, but fortunately I had some very tired spare leaves. Sadly the front springs have seen better days. Do you think someone has some replacement front springs in their ‘spares store’ I could buy? Any ideas??"

Can anyone help Mike?

Re: Front springs for Mike Summers

Posted: Wed Dec 16, 2009 9:42 am
by mike houston
Brost Forge in North London can retemper and reset springs for 'our' cars. They can also manufacture replacements where necessary. I found them to be efficient and accurate when overhauling mine, but I thought expensive. There are other spring specialists. Hope this helps.
Mike Houston.

Re: Front springs for Mike Summers

Posted: Wed Dec 16, 2009 3:10 pm
by Ian Grace
Thanks Mike - I'll pass this info on. Rear springs are available new from Mike Dowley as they are identical to M springs, but the M fronts are flatter. The slight catch is that they come without the clamp plates, so you need to retain these from your old springs when buying new ones from Mike - and probably other sources.