Minor Dynamos
Moderators: Ian Grace, Will Grace
Minor Dynamos
To jump start the Forum after the Christmas break, Roger Lucke and I are preparing a 'definitive' article on Minor dynamos and third brush electrickery for M 127 - explaining how they work, what to do when they go wrong and how to test them - in and out of the car. If anyone has any relevant input - tricks of the trade, etc. that they would like to contribute, then I'd be happy to graft them in to the article. Conversion to 2-brush or 12 volts will probably be kept for a future article, but let's have your input anyway. TIA, Ian
Hi Ian,
Nick Feakes, who runs teh MGCC forum is extremely knowledgeable re 3 - 2 brush dynamo conversions, how to use solid state diode systems (without altering the look of your voltage regulator/cutout) he als has a load of lucas technical articles on conversions from older CF type cutouts to the more modern (!) RF91/95 etc types..
He helped me sort out my 6 - 12 volt conversion, and 3 - 2 brush system on my M type...
Worth an email if you iintend to run a comprehensive article.
Regards
Nick Feakes, who runs teh MGCC forum is extremely knowledgeable re 3 - 2 brush dynamo conversions, how to use solid state diode systems (without altering the look of your voltage regulator/cutout) he als has a load of lucas technical articles on conversions from older CF type cutouts to the more modern (!) RF91/95 etc types..
He helped me sort out my 6 - 12 volt conversion, and 3 - 2 brush system on my M type...
Worth an email if you iintend to run a comprehensive article.
Regards
MG F1 Tourer, Morris 8 Special and ex M type owner