Page 1 of 1

Late 1932 SV Minor Front valence

Posted: Wed Jan 30, 2008 6:46 pm
by Sam Christie
A friend is trying to sort out some details on a late (November) 1932 SV Minor. This one has come with the long radiator (I thought it was a 1933 feature) .

Can anyone send me a picture of the front valence which went beneath this type of radiator please ?

My email is s_christie04@yahoo.co.uk

Any advice would be much appreciated.

Sam

Re: Late 1932 SV Minor Front valence

Posted: Wed Jan 30, 2008 7:04 pm
by Ian Grace
Look at Toby's saloon under 'My Minors' on the 'Our Cars' thread. This is the '33 season front valence, also correct therefore for late 1932 calendar cars.

Do I have your friend's car on the Register?

Re: Late 1932 SV Minor Front valence

Posted: Wed Jan 30, 2008 9:04 pm
by Sam Christie
Ian, this is perfect. My friend's car is to some extent in kit form but needless to say I will be drawing my his attention to the Register. Many thanks.

Re: Late 1932 SV Minor Front valence

Posted: Wed Jan 30, 2008 10:04 pm
by Ian Grace
Thanks Sam, and glad to be of some help. I think the Cooke Group (0116 288 1234) may be able to supply one of these valences for your friend.

Could I have chassis number and registration details for your friend's car?

Let me know if I can help with anything else.

By the way, I have a new (Whiting) M Rotax panel and studs available if you know of anyone who needs one, plus a pair of early swan neck headlamp supports. Located UK.

Re: Late 1932 SV Minor Front valence

Posted: Wed Jan 30, 2008 10:49 pm
by Highlander
I converted my 1933 long radiator minor to a 1932 short radiator. I prefered the look. My 1933 valence (same as Tobys) looks OK with the short rad - however if anyone has a 1931/2 valence spare I would like to hear from them. Alister.

Re: Late 1932 SV Minor Front valence

Posted: Wed Jan 30, 2008 11:18 pm
by Ian Grace
Likewise - I'd call the Cooke Group. I'm also going to need a '32 valence form my McEvoy at some stage. if the Cooke Group cannot supply, or are wildly expensive, we may be able to commission a batch within the VMR, although quantity discount is unlikely to be dramatic on such an item.

Re: Late 1932 SV Minor Front valence

Posted: Thu Jan 31, 2008 7:05 pm
by Toby
I had a new flat type valance but sold it to chris neale, he may not have used it yet if you need a pattern for new ones.

Re: Late 1932 SV Minor Front valence

Posted: Thu Jan 31, 2008 7:10 pm
by prharris25
You would be far better off getting a small batch made....they will stand a chance of fitting properly then !!!