Front brake actuating cams
Posted: Sat Nov 14, 2020 11:34 am
Hi Folks! Thanks to those, specially our superhuman Ian Grace for all the help regarding getting my wheels sorted out. Nick Mouat Specialist Wheel Builders near Andover [mouat.nick@googlemail.com] were very helpful and I recommend them. I now need some front brake actuating cams, or more specifically, even just the shafts would suffice? Ian Harris doesn't have any.
By the way, a tip; I have renewed the front wheel bearings and were able to buy some standard, seemingly metric, ones which fit and were very cheap. Simply Bearings or Whych Bearings, in Lancashire can oblige. I bought sealed ones because the original ones are poorly protected against dirt ingress on the outer side, just the wheel centre sliding over the hub, and if the little "Morris" bright cap is missing, nothing at all to keep contaminants out from the bearings!
We know that Morris used metric dimensions and threads in the twenties and thirties in the old French Hotchkiss engine plant in Coventry, bearings as well?
Nutty Nige
By the way, a tip; I have renewed the front wheel bearings and were able to buy some standard, seemingly metric, ones which fit and were very cheap. Simply Bearings or Whych Bearings, in Lancashire can oblige. I bought sealed ones because the original ones are poorly protected against dirt ingress on the outer side, just the wheel centre sliding over the hub, and if the little "Morris" bright cap is missing, nothing at all to keep contaminants out from the bearings!
We know that Morris used metric dimensions and threads in the twenties and thirties in the old French Hotchkiss engine plant in Coventry, bearings as well?
Nutty Nige