Page 1 of 1

Crankshaft bearing size

Posted: Sun May 26, 2013 8:00 am
by plj
The rear main size for the s.v. engine given in the morris register information manual is incorrect, should read 1 3/8" not 1 3/4".
Surprisingly enough this has been carried forward in each edition from 1965 onwards, not very observant are we?

Re: Crankshaft bearing size

Posted: Sun May 26, 2013 10:38 am
by Simon
Harry Edwards on page 91 of his Morris Minor manual got it right as MRJ13/8 but got it wrong on page 3 !