Felt seals on front stub axles.

[garagiste]

How many felt seals should there be on the front sub axles.

The inboard ones fine, but should there be outer ones?

Some diagrams show them others not.

[Ian Grace]

There's one behind the bearing, and on the later SV cars with Magna wheels, there was a small one inset into a brass cap under the stub axle nut that covered the bearing, and this brass cap had =an integral greaser. On the earlier cars, there was a steel disk with holes in it under the stub axle nut and no felt washer, so grease could escape into the small-centre wheel.

[garagiste]

Ian, Thanks.