Can someone tell me the correct size of the rubber rear engine mounts on a '29 Minor or whether the one's listed below are correct.
I have 4 rubber mounts which appear to be original Morris Minor "new old stock", the rubber is in good condition but seems quite hard.
They measure 1 19/64" H x 2 1/4" W with a 3/4" wide metal band around them.
The hole is the correct diameter for the tube in the mount.
Thanks, Allan Coates (in Australia)
Rear Engine Mounts
Moderators: Ian Grace, Will Grace
-
- Posts: 180
- Joined: Mon Nov 20, 2006 5:16 pm
- Location: Selby , North Yorkshire. UK
Minor Engine Mountings
According to Harry Edwards catalogue [ Yesterday's Components Ltd. ] the engine mountings for the Minor are rubber with no metal bands around.
Front Mountings are 1 3/8 " dia. and 5/8 " thick
Rear Mountings are 1 3/4 " dia. and 1 " thick.
I think that the mountings with bands round are M8 !
Hope this helps. The alignment of the prop shaft can be awkward if you get the mounting wrong , as I'm sure you may have found.
Good luck.
Tony Gamble.
Front Mountings are 1 3/8 " dia. and 5/8 " thick
Rear Mountings are 1 3/4 " dia. and 1 " thick.
I think that the mountings with bands round are M8 !
Hope this helps. The alignment of the prop shaft can be awkward if you get the mounting wrong , as I'm sure you may have found.
Good luck.
Tony Gamble.