Wanted - Minor throttle pedal, kingpins and front wing stay

This thread is for discussing parts for sale, wanted, or surplus.

Moderators: Ian Grace, Will Grace

Post Reply
Ian Grace
Site Admin
Posts: 5035
Joined: Sun Nov 19, 2006 12:55 am
Location: USA

Wanted - Minor throttle pedal, kingpins and front wing stay

Post by Ian Grace »

Mine is missing from the McEvoy. I have the complete throttle cross-shaft assembly and throttle pedal clamp that fits in the end of the pedal lever casting. I'm just mising the actual pedal.

Also, does anyone have any new pulley-type kingpins?

I'm also looking for a standard Minor near-side front wing support bracket. Mine got badly mangled somehow during shipping of the car from the UK.

Thanks in advance. :D
Simon
Posts: 275
Joined: Sat Dec 09, 2006 4:56 pm
Location: Surrey UK

Re: Wanted - Minor throttle pedal, kingpins and front wing s

Post by Simon »

If it is just the pedal that is missing how about using a large valve from a commercial vehicle with the correct size shaft(latteral thinking) :D

I think I may have a wing stay from the OHC Minor that was fished out of the Wey & Arun Canal. I will have a look and if I have one it can go in the Auction in the 2013 PreWar Prescott !!
Ian Grace
Site Admin
Posts: 5035
Joined: Sun Nov 19, 2006 12:55 am
Location: USA

Re: Wanted - Minor throttle pedal, kingpins and front wing s

Post by Ian Grace »

Thanks Simon - good idea to auction it in a good cause!

Ian
Toby
Posts: 1017
Joined: Tue Jan 09, 2007 4:49 pm
Location: New Forest

Re: Wanted - Minor throttle pedal, kingpins and front wing s

Post by Toby »

What about the kingpins I have for sale?
if it's got wheels or chips - it'll cost you dear
Ian Grace
Site Admin
Posts: 5035
Joined: Sun Nov 19, 2006 12:55 am
Location: USA

Re: Wanted - Minor throttle pedal, kingpins and front wing s

Post by Ian Grace »

Hi Toby,

Are they SV pulley pins?

If so I'll buy them!
Toby
Posts: 1017
Joined: Tue Jan 09, 2007 4:49 pm
Location: New Forest

Re: Wanted - Minor throttle pedal, kingpins and front wing s

Post by Toby »

No! although marked morris minor 1931-1933 they are the ones with the pulley opposite to sv, see discussion on brians king pins from a few months ago!
if it's got wheels or chips - it'll cost you dear
Ian Grace
Site Admin
Posts: 5035
Joined: Sun Nov 19, 2006 12:55 am
Location: USA

Re: Wanted - Minor throttle pedal, kingpins and front wing s

Post by Ian Grace »

Toby,

So if they have the cotter slot the same side as the pulley pin offset, I'd like them!

(While I'm on this topic, there is a small clarification to the kingpin article in M142 that I'm putting in M 143 Technical Topics. The article mentions that if the wrong pins are used on the OHC Minor, then the shackled pulley fouls the axle beam. Of course it is not the axle beam the pulley wheel fouls - it is the drop arm.)

Ian
Toby
Posts: 1017
Joined: Tue Jan 09, 2007 4:49 pm
Location: New Forest

Re: Wanted - Minor throttle pedal, kingpins and front wing s

Post by Toby »

NO! They are opposite to the post... I'm surprised I haven't sold them as back in the summer they were unobtainable!
if it's got wheels or chips - it'll cost you dear
Ian Grace
Site Admin
Posts: 5035
Joined: Sun Nov 19, 2006 12:55 am
Location: USA

Re: Wanted - Minor throttle pedal, kingpins and front wing s

Post by Ian Grace »

I believe they are still unobtainable! Ian Harris is talking about having some made, but he is out of stock too right now.

Maybe everyone is fitting Bowdens or converting to hydraulics these days?
Post Reply