SV engine parts needed for the McEvoy

This thread is for discussing parts for sale, wanted, or surplus.

Moderators: Ian Grace, Will Grace

Post Reply
Ian Grace
Site Admin
Posts: 5035
Joined: Sun Nov 19, 2006 12:55 am
Location: USA

SV engine parts needed for the McEvoy

Post by Ian Grace »

Can anyone help with any of the following? I'm about to start putting the engine together.

I am missing:

Starter motor and spacer
Dynamo bracket
Tappet chest cover
One knurled tappet chest cover retaining bolt thingy
Oil filler cap
Clutch thrust bearing assembly
Clutch/brake pedal cross-shaft
One valve collet
Throttle pedal - not strictly an engine part, I admit, but it will help make the engine louder. :D

I also have a set of new Hepolite standard size pistons, but the bores are worn, so I could either do with a set of cylinder liners or maybe swap my standard pistons for a set of plus sixties and rebore the block?
Toby
Posts: 1017
Joined: Tue Jan 09, 2007 4:49 pm
Location: New Forest

Re: SV engine parts needed for the McEvoy

Post by Toby »

May be able to help with some of this except oil filler cap and clutch bearing
if it's got wheels or chips - it'll cost you dear
Ian Grace
Site Admin
Posts: 5035
Joined: Sun Nov 19, 2006 12:55 am
Location: USA

Re: SV engine parts needed for the McEvoy

Post by Ian Grace »

Much appreciated, Toby.
Post Reply