Text size

Area for anyone experiencing problems with the website or the forum.

Moderators: Ian Grace, Will Grace

Post Reply
garagiste
Posts: 93
Joined: Wed Jun 15, 2011 8:22 pm

Text size

Post by garagiste »

What has happened to my text in the post I put on "technical" a few minutes ago?
David. :( :(
Ian Grace
Site Admin
Posts: 5035
Joined: Sun Nov 19, 2006 12:55 am
Location: USA

Re: Text size

Post by Ian Grace »

Hi David,

It looked OK from here, but the image was very large which might have been the problem. I re-sized it for you.

Is that OK now?

By the way, a good tip which I have not seen before. One thing I learned about gearboxes the hard way with my very first Minor back in the seventies was to never let the weight of the gearbox hang on the input shaft inserted into the tail bearing in the flywheel when removing the box. The shaft can seize in the bearing making it impossible to withdraw the box. Always take one of the top bolts off last, and support the weight of the box while undoing this last bolt.
garagiste
Posts: 93
Joined: Wed Jun 15, 2011 8:22 pm

Re: Text size

Post by garagiste »

Thank you Ian, it now looks better.

David.
Ian Grace
Site Admin
Posts: 5035
Joined: Sun Nov 19, 2006 12:55 am
Location: USA

Re: Text size

Post by Ian Grace »

My pleasure David.

If anyone else wants to post photos to the forum, if they send them to me, I can size them and then I upload them to a directory on the website so they stay visible in posts for all time.
Post Reply