Vintage Minor Register

Ian, Congratulations on your latest magazine. The quality is superb and you must be proud of it. Well done.

Come on Halbe!
Say what you really mean!

That's the way to do it

Hi Ian,
I have lent my copy out but I think it said 'Price paid £4750' from memory.
Clive

I spoke to Harry at some length about a couple or three months ago when all this was brewing and the although there were several irritatinng matters I rather gather the fuss over the auction was a bit of a last straw. In fact the items in the auction (which was a very small percentage of the total) ...

Hi Mike, Looking good. Any chance of a picture of your rear end if you understand what I mean. i'e' the bits going over the rear axle.

Cheers
C

This was also the case with SL which was made in the same month as Halbes. The only thing that resembled a harness was a leatherette sleeve holding the wires from the dash board to the firewall. There was a teeny length of heeringbone sleeve somewhere under the bonnet but it disintegrated along with...

Ian,

Don't know if this is the best place to post this but here it is.

Just thought I'd say Best Wishes to Jayne and hope she gets over her problems soon.

I'm sure other members will join me in this once they have read their e mails.

ATB
Clive & Bren

Ian,

Don't know if this is the best place to post this but here it is.

Just thought I'd say Best Wishes to Jayne and hope she gets over her problems soon.

I'm sure other members will join me in this once they have read their e mails.

ATB
Clive & Bren

Thanks Ian, Where there's a will ther's a way.

Ian, When you had the problem with the threads what did you do........ Did you re tap them?

Mike, I don't knf this is encouraging or not but the bodywork you have is a lot better than I have on NG. As a real amateur I don't have much advice to offer but I love working with Ash. The only tip I can add to what you have is to make sure you have drilled your holes with the right size drill whe...

I have answered quite a few of my own reconstruction queries as to where bits go by taking a quick peek at the lubrication chart.
Take a look. It seems to me that they are certainly hang downers as opposed to stand uppers.

C

Good question Mike. I would have asked it myself in about a fortnight.
It must be that time of year or is our progress pretty close.

ATB
C

Thought you had taken the weekend off Ian.